SerFibro connects building material importers, ventilated facade contractors, architects, and light-steel prefab manufacturers with specification-matched fibre cement boards from Türkiye—backed by transparent format verification, physical sample review, and export pallet coordination.
Self-coloured ColorBoard (Smooth, Striped, Stone, Wood) and uncoloured/paintable SerFibro Board (Smooth, Textured, Grooved, Cornice, Jamb & Lap Siding).
Clear distinction between outer board geometry (e.g. 1250 × 2500 / 3000 mm), usable module yield, and lap-siding effective coverage.
Zero generic certification claims—technical datasheets and test declarations are matched directly to the quoted board series.
Evaluated across EXW, FCA, FOB, CIF, and DAP terms with pallet protection engineered around payload tonnage limits.
Mass-pigmented core · Requires zero site painting · 4 Textures · 7 Product Colours + 5 Topcoats · Class A1
Autoclaved 1250 × 2500 × 10 mm (3.125 m² · 60 pcs/pallet) panels pigmented throughout their full cross-section in Smooth, Striped, Stone and Wood textures.
Natural grey unprimed or factory pre-primed · 6 Sub-Groups (33 Models) · 6–20 mm · Class A1
Complete autoclaved fibre cement range: Smooth (Int./Ext.), 12 Embossed & Calibrated Boards, 10 Grooved Profiles (Type 01–05 & A–E), 2 Cornice Profiles, 6 Window Jambs and Lap Siding.
8 + 8 mm Class A1 Faces · 16 DNS EPS Core (XPS/Rockwool/PUR on MOQ) · 60 / 80 / 100 mm
Composite ready-wall press-panels bonding two 8 mm autoclaved fibre cement boards to an EPS insulation core across 1250 × 2500 / 3000 mm in Smooth and 5 Architectural Wood/Stone reliefs.
Pigmented throughout the mineral core during manufacturing so cut edges match the surface—requiring zero site painting across 7 base colours and 5 optional topcoats (1250 × 2500 × 10 mm).
Autoclaved 1250 × 2500 × 10 mm mass-pigmented flat facade board (EN 12467+A2 Cat. A, Class A1, RL ≥ 0.75) requiring zero site painting across 7 core shades and 5 solution topcoats.
Rhythmic linear-striped architectural relief pressed into a mass-pigmented 1250 × 2500 × 10 mm Class A1 facade & interior panel requiring zero site painting.
Natural stone surface relief pressed into a 1250 × 2500 × 10 mm mass-pigmented Class A1 sheet—far lighter, faster to cut and easier to install than quarried stone with zero site painting.
Warm natural timber-grain relief pressed into a mass-pigmented 1250 × 2500 × 10 mm Class A1 mineral core—delivering rot-proof, pest-proof interior and exterior cladding with zero painting.
Autoclaved smooth interior (Category C) and exterior (Category A) flat boards supplied natural grey unprimed or factory pre-primed across 1250 × 2500 / 2800 / 3000 mm.
High-strength autoclaved EN 12467 Category C (Class 3, MOR ≥ 10.0 N/mm²) A1 non-combustible interior board across 22 format-thickness variants including 1250 × 2800 mm floor-to-ceiling partitions.
Weather-engineered EN 12467 Category A autoclaved exterior facade board with low thermal expansion (αt = 0.005 mm/mK), freeze-thaw durability and Class A1 fire safety across 16 variants.
Flat, calm architectural mineral boards supplied raw, factory-primed or coated for ventilated facades, light-steel assemblies and interior linings.
All 12 distinct surface textures: Walnut/Cedar Wood, Slate Stone, Natural Stone, Decorative Stone, Staggered Brick, Woven Stone, Mixed Stone, Small & Large Block Stone, Striped, Sanded and Double-Sided Calibrated boards.
Full-format mineral boards embossed with directional walnut or cedar timber grain for ventilated facades, modular housing and commercial elevations.
Lightweight Class A1 cleft-slate stone relief board in 1250 × 2500 × 10 / 12 mm—easily sawn to custom ashlar modules and finished in any exterior acrylic colour.
Moulded running-bond brick relief panels in pattern-matched 1225 × 2590 mm and 1225 × 3000 mm formats (10–12 mm) for modular housing and ventilated facades.
Precision-machined 12 mm autoclaved panel featuring a 6×12 grid of 92.5 × 195 mm small stone blocks on a 615 × 2460 mm (1.513 m²) module (100 pcs/pallet).
12 mm autoclaved interlocking & channel-grooved facade boards across New-Generation Type 01–05 (2500 mm) and Classic Type A–E (2500 / 3000 mm), produced in Smooth, Cedar, Walnut, Natural Stone, Decorative Stone and Slate patterns.
12 mm autoclaved dual-band shiplap grooved profile (175 mm / 275 mm groove pitch) in 405 × 2500 mm and 605 × 2500 mm delivering crisp factory-milled shadow joints and rapid installation (Smooth · Cedar Wood · Walnut Wood · Natural Stone · Decorative Stone · Slate Stone).
12 mm autoclaved wide single-band shiplap profile (375 mm / 580 mm net face) in 410 × 2500 mm and 615 × 2500 mm delivering crisp factory-milled shadow joints and rapid installation (Smooth · Cedar Wood · Walnut Wood · Natural Stone · Decorative Stone · Slate Stone).
12 mm autoclaved 3-band linear groove geometry (125 mm band pitch) in 413 × 2500 mm and 413 × 3000 mm delivering crisp factory-milled shadow joints and rapid installation (Smooth · Cedar Wood · Walnut Wood · Natural Stone · Decorative Stone · Slate Stone).
12 mm autoclaved 2-band architectural groove geometry (290 mm band pitch) in 608 × 2500 mm and 608 × 3000 mm delivering crisp factory-milled shadow joints and rapid installation (Smooth · Cedar Wood · Walnut Wood · Natural Stone · Decorative Stone · Slate Stone).
Class A1 non-combustible 20 mm solid autoclaved fibre cement horizontal floor-band mouldings in 200 × 2500/3000 mm (KS-01) and 205 × 2500/3000 mm (KS-02), replacing fragile foam cornices.
Solid 20 mm autoclaved 200 mm wide stepped architectural floor-band moulding profile in 2500 mm (180 pcs/pallet) and 3000 mm (150 pcs/pallet) lengths with Class A1 fire safety.
Solid 20 mm autoclaved 205 mm wide multi-stepped architectural cornice moulding profile in 2500 mm (180 pcs/pallet) and 3000 mm (150 pcs/pallet) lengths with Class A1 fire safety.
20 mm thick Class A1 stepped horizontal floor-band & cornice profiles (KS-01: 200 mm, KS-02: 205 mm) in 2500 and 3000 mm lengths.
20 mm thick Class A1 autoclaved window surrounds and corner trims across Flat Jamb (80–200 mm), 45° Beveled Jamb (80–200 mm), PS-01 (100 mm), PS-02 (120 mm), PS-03 (150 mm) and PS-04 (150 mm).
20 mm solid Class A1 autoclaved minimalist square-edged flat window/door architrave and corner band in 80, 100, 150 and 200 mm widths in 2500 mm and 3000 mm lengths.
20 mm solid Class A1 autoclaved 45°-chamfered window surround profile in 80, 100, 150 and 200 mm widths creating crisp angled reveal transitions in 2500 mm and 3000 mm lengths.
20 mm solid Class A1 autoclaved compact 100 × 2500 / 3000 × 20 mm stepped window architrave profile (360 / 300 pcs/pallet) in 2500 mm and 3000 mm lengths.
20 mm solid Class A1 autoclaved wide 150 × 2500 / 3000 × 20 mm classical stepped window architrave profile (240 / 200 pcs/pallet) in 2500 mm and 3000 mm lengths.
Overlapping horizontal lap-siding facade planks in 170 / 200 mm widths × 2500 / 3000 mm lengths (8 & 10 mm thickness) engineered for villas, light-steel residences and modular houses.
Weatherboard cladding planks (170 / 200 mm outer width, 8–10 mm) in wood-grain or smooth finishes for horizontal lap-joint facades and light-steel prefab homes.
Compact structural sandwich press-panels engineered for prefabricated buildings, modular cabins and light-steel structures: two 8 mm Class A1 autoclaved fibre cement boards bonded to a 16 DNS EPS core (with project/MOQ evaluation for XPS, Stone Wool and Polyurethane) in Smooth and 5 Wood/Stone reliefs.
Calculate geometric single-board area, planning allowance, and theoretical board count before requesting a formal quotation.
Engineering Note: This estimator computes geometric planning quantities only. Window/door reveals, facade joint layout, saw kerf, lap-joint overlap, pallet rounding, and container gross weight limits are verified during quotation.
Send Calculation to WhatsApp Quote DeskSelect your target product family, candidate sheet size (or net wall m²), surface finish state, and destination port/city.
We verify mould/format availability, match the exact technical datasheet (TDS), and prepare physical hand samples where needed.
Board counts are aligned with safe export pallet multiples and 20ft container or curtain-sider payload limits.
You receive a clear written quotation stating exact dimensions, lead-time window, Incoterm, and export documentation scope.
Coordinate architectural panel finishes, formats and export batching for open-joint rainscreen facade envelopes.
Exterior cladding planks, textured facade sheets and smooth wall boards matched to modular and light-gauge steel wall build-ups.
Mineral, concrete-inspired, grooved and colour-coated panels for dry architectural interiors, lobbies and high-traffic circulation walls.
Multi-palette surface coordination, technical submittals and scheduled export dispatches for offices, retail parks, hotels and public buildings.
Wholesale pallet optimization, fast-moving SKU selection, transparent Incoterms and repeat shipment coordination from Türkiye.
Honest material descriptions, surface-vs-core clarity, daylight sample evaluation and variant-specific documentation for architectural specifications.
An accurate B2B fibre cement quotation requires six core inputs upfront: intended indoor or outdoor application, exact surface and core state (raw, primed, coated or through-coloured), board dimensions and thickness in mm, ordered sheet or gross m² quantity per SKU, destination city or port with preferred Incoterm, and required technical documents or samples.
Net architectural wall area never equals gross fibre cement order quantity. Accurate B2B ordering separates four distinct metrics—net elevation m², gross sheet geometry (such as 3.125 m² for 1250 × 2500 mm), usable trimmed area after edge squaring and kerf, and effective installed coverage after lap-siding overlaps—before rounding upward to whole boards and full export pallets.
Evaluate architectural fibre cement samples using a six-step physical protocol rather than digital renders: inspect hand samples vertically outdoors under direct, overcast and grazing daylight; compare cut-edge core colour against the face; account for full-sheet tonal scale; check rear-face sealing and water-droplet drying; verify cleanability alongside adjacent facade materials; and record exact SF-* and TX-* codes with matching TDS files.
SerFibro operates under CFY Mühendislik Mim. Dan. Yapı Malz. İnş. San. ve Tic. Ltd. Şti. in Istanbul as a specialized B2B fibre cement board and facade panel supplier from Türkiye. Rather than claiming factory ownership, we match project and wholesale enquiries to verified Turkish production lines, share product-specific technical datasheets, and coordinate export packing and dispatch.
For flat and wood/concrete/colour architectural boards, 1250 × 2500 mm (3.125 m²) and 1250 × 3000 mm (3.75 m²) are the primary enquiry formats. Brick-relief panels frequently use pattern-matched outer sheets such as 1225 × 2590 mm or 1225 × 3000 mm, while horizontal lap cladding planks are commonly requested in 170 / 200 mm widths by 2500 / 3000 mm lengths. Exact availability is confirmed per order.
Factory-coated panels feature an opaque or semi-transparent architectural paint system applied onto a natural mineral grey fibre cement core; saw-cut edges expose the grey core and require compatible edge sealing. Through-coloured panels incorporate mineral pigments throughout the entire board matrix so face and cut edges share the same colour family, typically finished with a matte hydrophobic or translucent protective coat.
Depending on transport mode (road curtain-sider truck, intermodal trailer, or 20ft sea container) and destination country, quotations can be prepared on EXW, FCA, FOB (Turkish port), CFR/CIF, or CPT/DAP basis. Exact Incoterm and named place are stated clearly on every quotation.
Yes. Alongside domestic and export fibre cement board supply, our multidisciplinary CFY Engineering & Architecture team provides project design, architectural consultancy, facade engineering, sub-framing coordination (including galvanized light-steel profiles via our group brand SerProfil), and professional cladding application services tailored to project scope.
Our quote, sample, and estimator forms compile your selected product families, candidate formats, thicknesses, quantities, and delivery destination directly into a structured WhatsApp message to +90 505 507 04 18 without server-side upload delays. Once the chat opens, you can attach PDF elevations or Excel schedules directly—or email large CAD packages to [email protected].