Stone-Textured Fibre Cement Board

SerFibro Stone provides deep mineral stone and cleft-slate textures in mechanically fixed fibre cement panels. It enables architects and prefab manufacturers to articulate podium levels, villa plinths, entrance walls and commercial facade volumes with crisp masonry shadow lines while preserving dry-installed rainscreen cavity ventilation.

Unlike flat smooth sheets, stone-relief boards are pressed in textured moulds that dictate outer sheet dimensions: alongside 1250 × 2500 mm (3.125 m²) and 1250 × 3000 mm (3.750 m²), specific patterns utilize 1250 × 2620 mm (3.275 m²) or half-width 615 × 2460 mm (1.513 m²) formats in 10 mm and 12 mm thicknesses. Always confirm which outer format corresponds to your shortlisted TX-ST code before freezing substructure rail spacing.

The SerFibro Stone portfolio spans five distinct relief geometries: TX-ST-01, TX-ST-02, TX-ST-03, TX-ST-05 and TX-ST-06, ranging from fine layered slate clefts to coursed ashlar and rugged split-face stone blocks. On coursed stone designs, horizontal bed joints must align continuously from panel to panel, whereas organic slate textures still require uniform board orientation.

Stone panels are supplied either uncoated in raw mineral grey (suitable for site coating with breathable mineral/acrylic systems or documented raw exposure) or factory-coated in confirmed slate, anthracite, sandstone, travertine or limestone tones. Multi-tone patinated finishes require sample sign-off prior to order placement.

Panels are supplied with square or mould-specific perimeter edges depending on the TX-ST variant. When cutting coursed stone panels around windows and external corners, set out cut lines along recessed horizontal mortar channels wherever practical so cut edges blend naturally into the masonry rhythm.

SerFibro Stone is widely specified for ventilated ground-floor plinths (above splash-back clearance height per system rules), prefabricated steel-frame houses, retail and hospitality facades, perimeter garden/screen walls with proper capping, and architectural feature walls.

Install on engineered vertical metal or timber battens maintaining rear air circulation. Because stone relief thickness varies locally across peaks and mortar valleys, fasteners must be positioned in designated flat valley or fixing zones specified by the manufacturer guide, using pre-drilled oversize holes where required for thermal/hygric movement.

Supplied exclusively in 10 mm and 12 mm nominal thicknesses to preserve adequate structural root thickness beneath deep stone clefts. Mechanical properties, freeze-thaw resistance, water impermeability and reaction-to-fire documentation are verified directly on the TDS/DoP matched to the selected TX-ST variant.

Geometric unit areas differ significantly across Stone formats: 1.513 m² (615 × 2460 mm), 3.125 m² (1250 × 2500 mm), 3.275 m² (1250 × 2620 mm) and 3.750 m² (1250 × 3000 mm). Always enter the exact width and length of your confirmed mould into our Board Quantity Estimator, and allow 8%–15% waste where stone courses must align horizontally.

Deeply embossed 10 mm and 12 mm panels require stable flat wooden pallets matching the non-standard sheet lengths (such as 2620 mm or 2460 mm) so board ends never overhang unprotected. Pallet counts, gross weights and mixed-format stacking rules are detailed in your shipment quotation.

Store pallets indoors on dry, level bearers. High-relief stone peaks can chip or mar adjacent coatings if boards are dragged horizontally; always lift vertically off the stack and carry on edge. Brush saw dust out of deep stone crevices immediately after dry cutting.

Export shipments from Türkiye can combine SerFibro Stone with Smooth or Wood families on separate pallets within the same road trailer or container subject to weight distribution rules. Delivery terms (EXW, FCA, FOB, CFR, CIF, CPT or DAP) are confirmed in writing per enquiry.

Request a physical hand sample of your chosen TX-ST code alongside its dimensional mould sheet and TDS. Reviewing a physical piece confirms whether the stone scale suits close pedestrian viewing at ground-floor level or upper-storey facade elevations.

Standard material quotations cover SerFibro Stone — Stone-Textured Fibre Cement Board in the confirmed dimensions and surface state along with export palletising. Upon request, our CFY Engineering & Architecture team also provides architectural project design, modulation consultancy, facade engineering, substructure coordination, and professional site application as dedicated items in your quotation.