SerFibro ColorBoard — Through-Coloured Fibre Cement Facade Panels

SerFibro Color serves projects with a defined architectural colour palette—ranging from muted mineral greys, terracottas and earth tones to crisp corporate facade accents. Rather than grouping all coloured boards vaguely under one label, we separate Factory-Coated and Through-Coloured technologies from the first enquiry step so specifiers know exactly how the panel surface, core and cut edges will perform visually.

Standard enquiry formats are 1250 × 2500 mm (3.125 m²) and 1250 × 3000 mm (3.750 m²) across 8, 10 and 12 mm thicknesses. Confirm whether your selected colour line is delivered factory-squared ready for facade installation or requires perimeter trimming prior to edge sealing, as perimeter trim reduces usable width and length slightly.

Catalogued primarily on a smooth architectural plane (TX-SM-01), SerFibro Color finishes range from solid matte/satin facade coatings to mineral-matte semi-transparent glazes that allow subtle fibre cement character to read through. Maintain uniform production arrow orientation across adjacent panels to avoid perceived sheen shifts under angled sunlight.

Factory-Coated (Werkseitig beschichtet / Revêtu en usine / Fabrika Boyalı) applies an industrial multi-layer coating onto a standard grey mineral board—ideal when high colour uniformity or custom RAL/NCS matching is required, provided cut edges are sealed or painted. Through-Coloured (Durchgefärbt / Teinté dans la masse / Hamurdan Renkli) mixes mineral pigments into the raw slurry so the core shares the surface colour family—preferred by architects for crisp open joints, bevelled edges, perforations and subtle natural mineral variation, within a curated mineral palette.

Every site or workshop saw cut exposes fresh mineral edge material. On Factory-Coated panels, exposed cut edges show the grey core unless treated with colour-matched edge paint/sealer; on Through-Coloured panels, clear hydrophobic edge impregnation prevents differential moisture absorption (“picture-framing” dark borders after rain). Clarify edge-sealer supply with your board enquiry.

SerFibro Color is specified for ventilated commercial, educational, healthcare and residential rainscreen facades, entrance canopies, balcony spandrels, fascia bands and durable architectural interior wall panelling where documented suitability matches the building specification.

Coloured facade panels are mounted on vertical aluminium or timber substructures with black or colour-coordinated EPDM joint gaskets behind vertical joints so bright metal rails do not gleam through open shadow gaps. Visible rivets or facade screws are normally specified with powder-coated heads matching the panel colour code; approved concealed undercut anchors may apply to thicker variants (typically 12 mm, subject to system approval).

Coating chemistry (acrylic, polyurethane-modified or silicate/hydrophobic glazing), coating thickness, lightfastness test results and reaction-to-fire class vary directly by finish line. Never assume unverified UV warranties; review the exact variant TDS and DoP shared during quotation.

Panels supply 3.125 m² (1250 × 2500 mm) or 3.750 m² (1250 × 3000 mm) of gross geometric area. For bespoke or Through-Coloured shades, always include cutting waste plus a small attic-stock reserve (3%–5% extra sheets) in the initial production run, as small top-up orders months later may incur minimum batch surcharges or slight batch shade differences.

Finished coloured panels are stacked face-protected with non-staining interleaving on rigid export pallets, wrapped against transit moisture and road dust. Pallet board quantities and gross weights for 8, 10 and 12 mm variants are confirmed in your shipment packing summary.

Never leave wrapped pallets of coloured boards standing in direct sun and rain: solar heating over damp wrap creates a greenhouse condensation effect that can mark architectural coatings or cause mineral blooming. Store indoors in ventilated dry conditions, wear clean gloves when handling finished faces, and wipe alkaline saw dust off immediately with a dry microfibre cloth.

Multi-colour facade schedules can be consolidated from Türkiye into single or phased road/sea dispatches aligned with your construction programme. Incoterms (EXW, FCA, FOB, CFR, CIF, CPT or DAP) and named destination are defined clearly in the written quotation.

Digital RGB screens cannot reproduce matte mineral pigments accurately. Always request physical colour swatches of the shortlisted Factory-Coated or Through-Coloured references—inspecting both the face and the cut cross-section—alongside the matching product TDS.

Standard material quotations cover SerFibro ColorBoard — Through-Coloured & Coated Fibre Cement Panels in the confirmed dimensions and surface state along with export palletising. Upon request, our CFY Engineering & Architecture team also provides architectural project design, modulation consultancy, facade engineering, substructure coordination, and professional site application as dedicated items in your quotation.