Supply · Consultancy · Engineering · Application +90 505 507 04 18 [email protected]
SerFibro ColorBoard Wood 10 mm through-coloured timber-grain fibre cement facade and interior board
SerFibro ColorBoard Wood (TX-CB-WD) — natural timber-grain relief pressed into a 1250 × 2500 × 10 mm mass-pigmented Class A1 board.
Self-Coloured (Through-Coloured) SF-CB-WOOD · TX-CB-WD / TX-WD-01

SerFibro ColorBoard Wood Through-Coloured Board

SerFibro ColorBoard Wood unites the organic warmth of natural timber grain (TX-CB-WD) with the permanent mineral performance of a 1250 × 2500 × 10 mm autoclaved, mass-pigmented fibre cement sheet (EN 12467+A2 NT Type Category A, MOR ≥ 10.0 N/mm²). Where real timber facades face EN 13501-1 fire bans, greying, fungal rot, insect attack and recurring staining cycles, ColorBoard Wood provides verified Class A1 non-combustibility (tested at 600 °C without ignition), max. 0.2% moisture movement and full-depth colour across 7 base tones and 5 optional solution topcoats.

Brand SerFibro ColorBoard
Product Category Self-Coloured (Through-Coloured) ColorBoard (Self-Coloured) →
Product Group Through-Coloured Fibre Cement Board
Fire Resistance Class A1 TS EN 13501-1
Product Colours
Topcoat Colours
Application Areas
  • Interior Wall Cladding Applications
  • Exterior Facade Cladding Systems
  • Decorative Architectural Cladding
  • Ventilated Rainscreen Facades on All Building Types

Product Quick Specification Summary

Confirmed per variant & order
Product Form
Wood-Grain Through-Coloured Board EN 12467+A2 Cat. A · A1
Surface / Texture Code
TX-CB-WD TX-WD-01
Directional Natural Timber-Grain Relief
Supplied Finish Options
7 Base Through-Coloured Shades + 5 Optional Solution Topcoats
Common Enquiry Formats
1250 × 2500 mm
full sheet or rip-cut into timber planks
Candidate Thicknesses
10 mm
-10% e / +15% e textured thickness tolerance
Geometric Board Area
3.125 m² / board 60 pcs / pallet
187.5 m² / pallet

SerFibro ColorBoard — 15 Superior Architectural Advantages

Class A1 non-combustible building material according to TS EN 13501-1.

Emits zero toxic or environmentally harmful gases in the event of fire.

Mass-pigmented (through-coloured) throughout the board core and cut edges.

Water-repellent formulation unaffected by harsh rain and coastal climates.

Coloured during manufacturing, requiring zero on-site painting.

Enables crisp architectural detailing with continuous rear-ventilated facade airflow.

Ventilated mounting geometry extends the service life of thermal wall insulation.

Reduces wall dampness and prevents mould, fungi and organic growth.

Supports thermal and acoustic insulation performance for high energy efficiency.

Increases long-term structural durability and architectural asset value.

Achieves multiple elevation aesthetics (Smooth, Striped, Stone, Wood) on a single rail system.

Superior UV stability preserves mineral colour vibrancy for decades.

4 surface textures, 7 product colours and 5 topcoat colours unlock full design freedom.

High flexural strength (Min. 10.0 N/mm²) acts as a protective outer shield for buildings.

Open-joint system and low unit weight enable rapid, clean cutting and installation.

Board Dimensions & Pallet Packing Table

Technical Drawing Dimensions (mm × mm) Thickness (mm) Board Area (m²) Boards per Pallet Enquiry Form
1250 × 2500 mm 10 mm 3.125 m² 60 pcs
SerFibro ColorBoard

Instant Board Quantity, Area & Volume Enquiry

SerFibro ColorBoard Wood Through-Coloured Board

SerFibro ColorBoard — Complete Technical Specifications Table

Property / Parameter Specification Value
Product Definition Through-coloured cellulose fibre reinforced cement and silicate autoclaved board
Product Type & Category NT Type, Category A (TS EN 12467+A2)
Surface Appearance Smooth / Textured (Optional Topcoat Painted / Solution Marble Effect)
Dimensional Tolerance Level Level 1
Minimum Modulus of Rupture (MOR) Class Class 2
Standard Dimensions 1250 × 2500 mm
Thickness 10 mm
Length / Width Tolerance ± 5 mm
Thickness Tolerance (e: board thickness) Smooth: ± 10% e | Textured: -10% e / +15% e
Reaction to Fire Non-combustible, Class A1 building material per EN 13501-1
Out-of-Squareness ± 2 mm/m
Edge Straightness ± 0.1% a (a: edge length)
Apparent Density 1350 ± 50 kg/m³
Water Vapour Diffusion Resistance μ ≤ 30
Porosity 30%
Flexural Strength Min. 10.0 N/mm²
Freeze-Thaw Performance RL ≥ 0.75 — Resistant to freeze-thaw cycles
Water Impermeability Water-impermeable
Soak-Dry Performance Resistant to soak-dry cycles — RL ≥ 0.75
Warm Water Performance RL ≥ 0.75 — Resistant to warm water
Asbestos Content 100% Asbestos-free (NT Type board)
Harmful Substance / Gas Emission Zero harmful substance or toxic gas emission
Thermal Expansion Coefficient Δt = 0.005 mm/mK
Thermal Conductivity λ = 0.20 W/mK
Moisture Movement Maximum: 0.2%
Heat-Rain Performance After 50 heat-rain cycles on Category A boards, no visible cracking, delamination, warping, bowing or defects affecting service performance occurred.
SerFibro ColorBoard

Architectural Facade & Material Appearance Examples

Architectural facade visuals illustrating real texture, joint modulation, and profile details for this fibre cement series. Available as standalone material supply or with integrated project consultancy, facade engineering, and application.

Open Full Facade & Material Gallery
Terrace & Parapet Detail · ColorBoard Wood & Anthracite

Rip-Cut Self-Coloured Fibre Cement Balustrade Slats Exposed on All Cut Edges

Full cross-section colour · Class A1 weatherproof slats
Exposed Roof Terrace · ColorBoard Wood & Stone

Frost- & UV-Resistant Self-Coloured Wall Cladding and Slatted Parapet System

EN 12467+A2 Category A · Frost & UV resistant
Residential Villa · ColorBoard Wood

Warm Timber-Tone ColorBoard Wood Paired with Anthracite Smooth Panels

Through-coloured wood grain + optional topcoat glaze
Twin Villa Exterior · ColorBoard Smooth (Anthracite & Smoke)

Anthracite Through-Coloured Smooth Rainscreen Cladding on Modern Twin Residence

Mass-pigmented 10 mm core · Zero site painting

16-Point Technical & Export Supply Dossier

01 Overview & Non-Combustible Timber Aesthetics

Index

SerFibro ColorBoard Wood (SF-CB-WOOD) answers one of contemporary architecture’s most frequent challenges: achieving warm timber-grain facades and interior walls on buildings governed by strict EN 13501-1 Class A1 fire codes and low-maintenance lifecycle budgets. Pressing authentic wood grain into a 10 mm mass-pigmented autoclaved mineral core eliminates rot, cupping, wood-boring insects and periodic exterior staining.

02 × 2500 × 10 mm Full Panels or Custom Rip-Cut Planks

Index

Supplied as 1250 × 2500 × 10 mm full sheets (3.125 m², Level 1 length/width ± 5 mm, squareness ± 2 mm/m, textured thickness -10% e / +15% e), SF-CB-WOOD can be mounted as wide architectural timber panels or rip-cut longitudinally into 200 mm, 250 mm or 300 mm × 2500 mm open-joint rainscreen planks—with self-coloured edges that need no touch-up paint.

03 Longitudinal Timber-Grain Flow & Continuity

Index

Under texture code TX-CB-WD, the natural wood grain runs along the 2500 mm axis. Preserve grain flow and rear arrow direction across adjacent sheets and cut planks so vertical board-and-batten rhythms or horizontal timber bands read naturally under daylight and interior architectural lighting.

04 Warm Cedar, Walnut, Driftwood & Modern Charcoal Wood Tones

Index

Choose warm timber expressions via Dark Beige (CB-DBJ), Amber Orange (CB-ORG) and Brick Terracotta (CB-BRK) plus TC-ORG/TC-BRK solution topcoats; Nordic driftwood and weathered silver-cedar looks via Natural (CB-NAT), Ash Grey (CB-ASH) and Smoke Grey (CB-SMK); or dramatic charred-timber (Shou Sugi Ban style) accents via Anthracite (CB-ANT / TC-ANT).

05 Plank Slitting, Window Jambs & Clear Edge Impregnation

Index

ColorBoard Wood saws cleanly without splintering using carbide or diamond blades. When slitting sheets into narrow timber-look facade planks or soffit slats, lightly deburr cut edges and apply clear breathable hydrophobic sealer to maintain uniform wet-weather appearance.

06 Warm Interior Walls, Hospitality, Schools & Ventilated Facades

Index

Widely specified on residential apartment balconies, timber-banned high-rise facades, modular eco-lodges, schools, wellness spas, restaurant interiors, acoustic baffle walls and sheltered balcony soffits—combining biophilic warmth with sanitary mineral hygiene and A1 fire safety.

07 Ventilated Rainscreen & Interior Batten Fixing

Index

Externally, fix onto vertical aluminium or galvanized steel profiles with black EPDM gaskets, 20–40 mm rear air cavity and 8–10 mm open joints using colour-matched rivets/screws. Internally, panels mount directly onto metal C-studs or calibrated timber battens.

08 EN 12467+A2 Category A, RL ≥ 0.75 & Max. 0.2% Moisture Movement

Index

Natural softwood cladding can swell or shrink by 3%–6% across wet/dry seasons; autoclaved SF-CB-WOOD restricts moisture movement to max. 0.2% alongside thermal expansion Δt = 0.005 mm/mK, λ = 0.20 W/mK, MOR ≥ 10.0 N/mm², RL ≥ 0.75, 50 passed heat-rain cycles and 600 °C Class A1 fire performance.

09 Board Area, Plank Yield & Grain-Direction Waste Allowance

Index

One 1250 × 2500 mm sheet covers 3.125 m² gross—or yields four ~305 × 2500 mm planks (allowing for saw kerfs) or five ~245 × 2500 mm planks. Account for saw-blade kerf width when ripping planks plus 8%–12% directional cutting allowance.

10 Export Palletising (60 Boards / 187.5 m²)

Index

Shipped 60 boards (187.5 m²) per wooden export pallet with protective interleaving between wood-grain surfaces, rigid edge guards and waterproof wrapping—completely exempt from raw-timber bark pest quarantine issues.

11 Dry Indoor Storage & Clean Handling

Index

Store pallets flat in dry, ventilated indoor conditions away from direct sun and rain. Lift panels vertically by two operators without dragging across the grain below, and remove alkaline cutting dust dry immediately after sawing.

12 Export Dispatch & Mixed Architectural Facade Loads

Index

Exported from Türkiye under EXW, FCA, FOB, CFR, CIF, CPT or DAP terms. Combine warm ColorBoard Wood balcony/accent pallets with neutral Ash Grey or Anthracite ColorBoard Smooth field pallets in one container.

13 Wood-Grain Colour Samples & Fire/DoP Documentation

Index

Request physical ColorBoard Wood hand samples in warm beige/terracotta, driftwood grey or charred anthracite tones together with our EN 13501-1 Class A1 and EN 12467+A2 Category A submittal documents.

14 Supply, Consultancy, Engineering & Application Scope

Index

Standard material quotations cover SerFibro ColorBoard Wood Through-Coloured Board (SF-CB-WOOD) in the confirmed dimensions and surface state along with export palletising. Upon request, our CFY Engineering & Architecture team also provides architectural project design, modulation consultancy, facade engineering, substructure coordination, and professional site application as dedicated items in your quotation.

Related Fibre Cement Product Families

Frequently Asked Technical & Commercial Questions

How does SerFibro ColorBoard Wood differ from SF-WOOD and SF-SIDING?

ColorBoard Wood is a full-size 1250 × 2500 × 10 mm panel mass-pigmented throughout its core (7 base colours + 5 solution topcoats) requiring zero site painting. SF-WOOD covers raw/primed or surface-coated wood-grain boards, while SF-SIDING supplies narrower overlapping lap-siding planks.

Can ColorBoard Wood be used on high-rise facades where combustible timber and WPC are prohibited?

Yes. Unlike natural timber (typically Class D) or polymer-wood composites (WPC), ColorBoard Wood is certified EN 13501-1 Class A1 non-combustible (tested at 600 °C without ignition or toxic gas emission).

Does ColorBoard Wood rot, warp or attract termites in humid or coastal climates?

No. Its autoclaved mineral silicate matrix is impervious to fungal rot, mould, termites and woodpeckers, and keeps moisture movement below max. 0.2% with EN 12467+A2 Category A freeze-thaw durability (RL ≥ 0.75).

Can we rip-cut ColorBoard Wood sheets into narrow facade planks with open joints?

Yes. Cutting 1250 × 2500 mm boards lengthwise into 200–300 mm strips is a popular architectural detail; because the 10 mm core is through-coloured, the sawn long edges match the face tone and only require clear hydrophobic sealer.

Does ColorBoard Wood need periodic varnishing or oil maintenance like real wood?

No. Neither oiling, staining nor repainting is required—occasional gentle washing with clean water and mild neutral detergent removes atmospheric dust.

16 SerFibro ColorBoard Wood Through-Coloured Board

Structured B2B Quotation & Sample Request (Direct WhatsApp)

Compile single or multiple fibre cement product lines, thicknesses, formats, and destination details into a structured technical summary sent directly to our export desk on WhatsApp (+90 505 507 04 18). Zero server form queues.

Product Specification Lines

For multi-sheet CAD/PDF packages, you may also email: [email protected]

Ready to Verify Formats, Finishes & Export Delivery Terms?

Share your target board thickness, outer dimensions, finish state, and destination port. Our commercial office prepares a product-matched quotation and sample dispatch plan.

Request via WhatsApp Request Export Quote +90 505 507 04 18
WhatsApp Export & Supply Desk