Supply · Consultancy · Engineering · Application +90 505 507 04 18 [email protected]
Get a Quote
Project MOQ · Full-Pallet & Repeatable Module Schedule (No Retail Single Cuts)

Cut-to-Size Fibre Cement Boards & Pre-Sized Facade Modules (Project MOQ)

Eliminate dusty site sawing, out-of-square cuts, and installation delays on large building envelopes. Under CFY Engineering & Architecture supervision, SerFibro supplies squared rectangular fibre cement modules cut from 1250 × 2500 / 2800 / 3000 mm master sheets—complete with axis/pose pallet coding and project-evaluated CNC drilling, chamfering, and edge sealing—strictly for B2B orders meeting full-pallet and repeatable schedule MOQ.

Request via WhatsApp Get a Quote Calculate Board Quantity
Cut-to-size modular fibre cement ventilated facade panels arranged on a commercial building elevation
Representative surface & application visual — final shade, relief depth, and batch texture are verified via physical sample prior to order.

Service Summary & Order Rules

MOQ & Order Rule Full master-pallet multiples + repeatable module schedule (no single/retail cuts)
Master Sheet Formats 1250 × 2500 / 2800 / 3000 mm (Brick relief: 1225 × 2590 / 3000 mm · 6–20 mm)
Core Sizing Scope Squared straight/rectangular PCD sizing + elevation axis/pose labeling & custom palletising
Project Options CNC fixing pre-drilling, edge chamfer / groove machining & post-cut edge impregnation

1. Squared Straight & Rectangular Module Sizing from Master Sheets

Full-size autoclaved boards (1250 × 2500, 1250 × 2800, or 1250 × 3000 mm) are divided into repeatable facade cassettes, spandrel bands, soffit strips, or modular wall infills on industrial dry-cutting lines equipped with polycrystalline diamond (PCD) blades and vacuum extraction.

  • Perimeter edge squaring trim (typically 10–15 mm per outer edge on raw factory sheets) plus 3–4 mm blade kerf per cut are factored into net module yield.
  • Directional surface reliefs (TX-* wood, linear, slate) and ColorBoard rear sanding arrows are strictly locked—panels are never rotated 90° without written approval.
  • Immediate dry removal of alkaline mineral dust prevents pale staining on through-coloured or factory-primed faces.

2. Facade Axis / Pose-Coded Labeling & Custom Protected Palletising

Pre-cut modules of varying widths and lengths cannot be shipped loose on standard raw-board skids without edge chipping or load shifting. SerFibro coordinates structured pallet architecture matched to site installation sequences and export road/container forces.

  • Batch or piece-group identification labels referencing elevation, floor, axis, and pose code (e.g. ELEV-N · AX-04 · P-12) per your approved schedule.
  • Protective interleaving sheets where coated/through-coloured faces require friction protection, paired with rigid corner boards and PET strapping.
  • ISPM-15 heat-treated custom timber skids engineered around 20ft container or curtain-sider payload limits.

3. CNC Fixing Pre-Drilling & Edge Chamfer / Groove Machining (Project Option)

Where batch volume and CAD documentation justify workshop machining, secondary CNC operations can be evaluated alongside rectangular sizing so facade crews mount panels directly onto galvanized steel or aluminium sub-frames.

  • Pre-drilled facade fixing holes strictly per approved DXF coordinates—differentiating fixed-point holes from oversized sliding holes required for hygrothermal expansion.
  • Light arris/chamfer (pah) dressing on exposed open-joint edges or 45° mitre evaluation on adequate board thicknesses.
  • Surface groove / relief routing evaluated only after verifying residual core thickness against EN 12467 mechanical span requirements.

4. Post-Cut Edge Sealer, Hydrophobic Impregnation or Touch-Up (Project Option)

Sawing any fibre cement board exposes fresh cross-sectional edges. Rather than implying that edge treatment is automatically included or unnecessary, SerFibro defines cut-edge behaviour transparently according to the selected product pillar.

  • SerFibro ColorBoard (10 mm Through-Coloured): Mineral pigments run throughout the core so cut edges match the surface colour family; clear hydrophobic edge impregnation can be evaluated for severe exposure zones.
  • Natural / Pre-Primed / Coated SerFibro Board: Saw cuts expose the natural mineral grey core; alkali-resistant edge sealer or colour-matched edge touch-up can be quoted as an explicit processing line.
  • Supplied edge-care liquid kits can also be coordinated alongside bulk pallet dispatch for minor on-site perimeter trims.

5. Full-Pallet & Repeatable Module Schedule MOQ Policy

Industrial precision sizing requires saw-line calibration, dust-extraction tooling, custom pallet blocking, and single-lot shade coordination. Therefore, SerFibro operates cut-to-size strictly as a B2B project and export service—not a retail DIY cutting counter.

  • Orders must correspond to full master-sheet pallet multiples (e.g. 60 master sheets/pallet on 10 mm 1250 × 2500 mm boards, or variant-specific pallet counts) and repeatable rectangular module groups.
  • Single-sheet orders, residential repair pieces, non-geometric freehand curves, or unverified hand sketches without tolerance sign-off are not accepted.
  • Where a project requires bespoke factory coating or non-standard composite cores alongside sizing, production-run MOQ and lead time are confirmed together in writing.

6. Master Sheet Nesting Yield, Offcut Accounting & Transparent Pricing

In professional facade procurement, cut-to-size pricing is governed by how efficiently your target module dimensions nest onto 1250 × 2500 mm (3.125 m²), 1250 × 2800 mm (3.500 m²), or 1250 × 3000 mm (3.750 m²) master boards once edge trim and saw kerf are deducted.

  • Geometric illustration: Four 600 × 1200 mm modules (2.880 m²) nested 2 × 2 on one 1250 × 2500 mm master sheet (3.125 m²) represent 92.16% geometric yield (7.84% offcut), whereas 700 × 1400 mm modules leave substantial offcuts unless paired with narrower spandrel/reveal strips.
  • Our architectural team highlights minor module grid adjustments (often 10–25 mm) during design review that can unlock dramatically higher master-sheet yield.
  • Written quotations itemize consumed master-sheet pallets separately from cutting, optional CNC/edge work, and custom pose-coded palletisation—never hiding waste inside opaque m² figures.

4-Step B2B Cut-to-Size & Nesting Quotation Workflow

01

Submit Cutting Schedule & Series

Send your Excel module schedule or PDF/CAD facade elevations indicating board series, thickness, finish, grain direction, and destination.

02

Master-Sheet Nesting & MOQ Check

We evaluate optimal master-sheet length (2500 / 2800 / 3000 mm), verify full-pallet MOQ eligibility, and check optional CNC/edge specs.

03

Sample Sign-Off & Itemized Proforma

Approve physical surface/edge specimens and a transparent written proforma separating master-sheet pallets from machining & packing lines.

04

PCD Sizing, Pose Coding & Dispatch

Boards are dry-cut to tolerance, cleaned, grouped with elevation/axis labels on reinforced pallets, and dispatched under your chosen Incoterm.

Cut-to-Size & Facade Module Preparation — Technical & Commercial Scope Matrix
Operation / Parameter Engineering & Input Requirement Commercial & MOQ Scope Basis
Squared Rectangular Sizing Module width × length × thickness, quantity per pose, tolerance level & visible face. Core service · Full-pallet & repeatable schedule MOQ
Perimeter Squaring & Blade Kerf 10–15 mm outer edge trim on raw master sheets + 3–4 mm PCD blade kerf per cut line. Factored into master-sheet nesting calculation
Texture & Sanding Arrow Lock Mandatory grain/arrow orientation declared on schedule for TX-* reliefs & ColorBoard. Included · Prevents 90° shade mismatch on facade
Axis / Pose Labeling & Custom Pallets Elevation/axis/pose code list + forklift/container unloading constraints at site. Core logistics scope · Itemized custom pallet protection
CNC Pre-Drilling (Fixed / Sliding) Approved DXF/DWG hole coordinates, diameters, countersink spec & sub-frame span. Optional · Evaluated per batch MOQ & thickness
Edge Chamfer (Pah) & Surface Grooving Detail section drawing, chamfer angle/depth & verified residual core thickness. Optional · Evaluated on compatible thicknesses (≥10 mm)
Post-Cut Edge Impregnation / Touch-Up Through-coloured ColorBoard hydrophobic sealer vs coated/natural edge primer/paint. Optional · Quoted as an explicit line item or kit
Master-Sheet & Offcut Accounting Calculated on full consumed master sheets/pallets; reusable strip bundling on request. Transparent separation of material vs machining cost

Structured B2B Quotation & Sample Request (Direct WhatsApp)

Compile single or multiple fibre cement product lines, thicknesses, formats, and destination details into a structured technical summary sent directly to our export desk on WhatsApp (+90 505 507 04 18). Zero server form queues.

Cut-to-Size & Preparation Operations Requested (Full-Pallet & Module Schedule MOQ — No Retail Single Cuts)

Product Specification Lines

For multi-sheet CAD/PDF packages, you may also email: [email protected]

Related Fibre Cement Product Families

Frequently Asked Technical & Commercial Questions

What is the Minimum Order Quantity (MOQ) rule for cut-to-size fibre cement orders?

Industrial beam-saw and CNC calibration, perimeter squaring trim (~10–15 mm per edge), and custom export pallet framing require commercial batch scale. Therefore, cut-to-size MOQ is defined by full master-sheet pallet multiples (1250 × 2500 / 2800 / 3000 mm or 1225 × 2590 / 3000 mm) combined with repeatable rectangular facade module schedules. Retail, DIY, or single-sheet custom cuts are not accepted.

What is the difference between nominal outer sheet size and usable cut module area?

Nominal outer size describes the delivered rectangular sheet (e.g. 1250 × 2500 mm). When cutting architectural facade cassettes, perimeter edge squaring trims (often 10–15 mm per edge on raw boards), saw blade kerf (3–4 mm per cut), and directional grain constraints reduce net yield. Always verify whether your facade grid requires factory-squared edges.

Can CNC fixing pre-drilling, edge chamfering, and cut-edge sealing be included with cut-to-size panels?

Yes, as separately quoted project-based machining lines when approved DXF shop drawings are supplied. CNC pre-drilling distinguishes fixed-point and sliding-point holes per substructure thermal expansion rules. For cut edges, through-coloured SerFibro ColorBoard (10 mm) exposes its pigmented core and can receive clear hydrophobic impregnation, whereas natural/coated SerFibro Board exposes its mineral grey core and can be quoted with compatible edge sealer or touch-up.

How are master-sheet consumption, nesting offcuts, and pose-coded pallets priced in cut-to-size quotes?

Commercial quotations transparently separate material and processing: material is billed based on the total full master-sheet pallets consumed by the approved nesting layout (accounting for ~10–15 mm perimeter trim, ~3–4 mm PCD saw kerf, and grain/sanding direction lock), while sizing, CNC operations, pose/axis labeling, and ISPM 15 custom palletising are itemised separately. Usable rectangular offcuts can be packed on request if agreed prior to cutting.

What is the technical difference between Factory-Coated and Through-Coloured fibre cement panels?

Factory-coated panels feature an opaque or semi-transparent architectural paint system applied onto a natural mineral grey fibre cement core; saw-cut edges expose the grey core and require compatible edge sealing. Through-coloured panels incorporate mineral pigments throughout the entire board matrix so face and cut edges share the same colour family, typically finished with a matte hydrophobic or translucent protective coat.

Why must texture orientation and rear sanding arrows be tracked during cutting?

Woodgrain (TX-WD), coursed stone (TX-ST), brick (TX-BR), linear ribs (TX-LN), and sanded matte boards (TX-SD) interact directionally with daylight. Rotating one panel by 90° or 180° on a facade elevation creates visible shade differences even within the same production batch.

Ready to Verify Formats, Finishes & Export Delivery Terms?

Share your target board thickness, outer dimensions, finish state, and destination port. Our commercial office prepares a product-matched quotation and sample dispatch plan.

Request via WhatsApp Request Export Quote +90 505 507 04 18
WhatsApp Export & Supply Desk